Im building an IMCA Legal Stock car and you can run an aftermarket floor pan. What Im wondering is it easier to buy one or build one. If building one is cheaper some ideas on how to build it would be great. Thank you for any help.
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 4 of 4
Thread: IMCA Stock Car floor pan
-
03-09-2011, 04:01 PM #1
Junior Member
- Join Date
- Aug 2009
- Posts
- 12
IMCA Stock Car floor pan
-
03-09-2011, 04:51 PM #2
Senior Member
- Join Date
- Jan 2011
- Posts
- 170
unless you have experience and a brake, its going to be mush easier for you to just buy one and install it.
-
03-09-2011, 05:30 PM #3
Junior Member
- Join Date
- Aug 2009
- Posts
- 12
I have access to a 8ft brake and have built a few aluminum bodies and have family memeber thats built car bodies(steel and aluminum) for years.
-
03-09-2011, 06:30 PM #4
Senior Member
- Join Date
- May 2007
- Posts
- 1,289
shoule be fairly easy. i'd build it in 2 pieces a front 1/2 and a back 1/2. make the driveshaft tunnel square..nice place to mount your shifter. make the trans tunnel start square and widen out towards the front. leave enough room for the drivers feet!
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 12:31 PM.
Bookmarks