Looking for a hyd cam to pul 17 inches @1000 .running a 377 13 to 1 double hump heads factory z/28 intake.any postive input would be app.thanks
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 4 of 4
Thread: vacuum cam
-
04-12-2011, 12:54 PM #1
Junior Member
- Join Date
- Nov 2007
- Posts
- 19
vacuum cam
-
04-13-2011, 01:50 PM #2
Banned
- Join Date
- Aug 2007
- Location
- Down on the Corner out in the street
- Posts
- 95
I've been told that the Comp cams vacuum cam was my best bet on a 355. Heard about guys running 602 crate cams and getting good power.
-
04-21-2011, 07:24 PM #3
Senior Member
- Join Date
- May 2007
- Posts
- 288
Crane 113801 is a good cam and will pull around 17 at 900 rpm, so it should be about right for 17 at 1000.
-
04-21-2011, 08:57 PM #4
Member
- Join Date
- Feb 2009
- Posts
- 97
Rhoads lifters
Try running rhoads lifters and tighten your valve lash a little with any cam, makes for a good boost in vacuum
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 05:03 AM.
Bookmarks