Results 1 to 5 of 5

Thread: loose entry

  1. #1
    Join Date
    Jul 2007
    Posts
    259

    Default loose entry

    car is loose on entry off the throttle, feels like the rr is just sliding on top of track.
    car is leaf spring.
    whats the best way to load the rr more on entry so it will tighten up gettin in and still come off good

  2. #2
    Join Date
    Dec 2007
    Posts
    1,039

    Default

    Move RR tire/wheel In
    Lower RR air psi
    Move ballast/fuel cell up and/or to the right
    Stiffen RR spring, may loosen exit
    Run less LR bite
    Taller lowering blocks
    Less compression in RR shock to quicken weight transfer
    Gill T. Azell

  3. #3
    Join Date
    Aug 2007
    Posts
    187

    Default Loose

    Also stiffen LF or weaken RF

  4. #4
    Join Date
    Feb 2008
    Location
    Barrington il.
    Posts
    881

    Default

    Pull in rt. rear wheel or move out lft. rear wheel. Soften rt. rear spring. Check your shock travel indicaters. You don't want more than 4 inches of wheel travel on rt. rear. If you have more than that you are most likley to soft on rt. rear spring. Yopu can also move rt. front wheel out to tighten on entry.

  5. #5
    Join Date
    May 2010
    Posts
    632

    Default

    Don't let up on the gas so much, or turn up the idle.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 08:36 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.