Moisture coming out of header

[crate late]

Anybody ever had a motor that would spit a little bit of moisture out of one side of the headers? 604 crate on E85 when it's started up cold the drivers side will expel a little bit of moisture out of it. Not much but about 30 seconds after it cranks you can hold your hand up to the header and it will be a little wet but about 1 minute after the moisture stops coming out. If you smell of the moisture on your hand it has no smell, and the cooling system has antifreeze in it so I would think you could smell or taste it. Would this have anything to do with the breather system on the drivers side valve cover or the e85?

[joeltjen]

wouldn't worry too much. my methanol motor always puts a little moisture down when i start it. if ya let it set and idle for a while, pull the carb and you'll probably see that the inside of your intake is all wet too , same goes for the inside of your valve covers. its a common thing especially in the summer when the humidty gets real high