Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2008
    Posts
    1,238

    Default pilot berring question?

    can this one be used without a motor plate??
    http://www.speedwaymotors.com/Chevy-...hing,6974.html

  2. #2
    Join Date
    Dec 2008
    Posts
    1,238

    Default

    anybody????

  3. #3

    Default probably not.........but

    you could bolt up your bell housing and trans without your clutch installed . see if the trans slides up all the way easily and look in the clutch fork hole and make sure you are not bottoming the splines of the input shaft up against the bushing. if theres a little room left between the splines and the bushing you should be good to go. you dont want to push your input shaft back into the trans.

  4. #4
    Join Date
    Dec 2008
    Posts
    1,238

    Default

    think it would work after lookin at it,..but found a stock one in my tool box,..thanks!

  5. #5
    Join Date
    Jul 2007
    Posts
    3,223

    Default

    No it wont work.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 04:19 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.