Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2011
    Posts
    20

    Default Aluminum 23 Degree Heads Wanted

    I am looking for a good set of 23 degree heads that are capable of withstanding up to 8000 RPM and 700-800 Hp please messsage me with with anything you have.
    Thank You!!!!

  2. #2
    Join Date
    Sep 2007
    Posts
    164

    Default 23 degree Heads??

    I have a new set of the raised runner 23 degree heads, with valves and matching intake. These are the last design before the 18* and the SB 2 heads. These are raw castings that have never been touched or put together. If interested, send me a PM.

  3. #3

    Default Heads

    I have a brand new set of AFR Eliminator 235cc/70cc heads. Competition ported, titanium retainers, LW 8mm valves (2.100"/1.600") Decided not to use these on my used bottom end, didn't want to mill a nice set of heads. Will deal, would like to move. Also have a brand new set of Jesel shaft rockers to fit. PM me or give me a call if they interest you.

    Justin Chaddock
    585-703-5414

  4. #4
    Join Date
    Oct 2008
    Posts
    10

    Default Top end all draime

    T& e rocker // complete top end push rod, locks, v cover, intake , rev kit -- nice stuff /off 410 make 730 hp .. 615 893 0212 .. 3500

  5. #5
    Join Date
    Oct 2008
    Posts
    10

    Default Top end

    Also have a set 11x flow big number top end / off 440

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 05:25 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.