it seems every week my bolts holding the drive flange to the hub come loose.What is causing this?axle length,axle spacing off?This is a brand new hub with new bolts and lock washers all threads are in great shape.
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 5 of 5
Thread: lr hub drive flange
-
08-30-2011, 12:21 PM #1
Senior Member
- Join Date
- May 2009
- Posts
- 271
lr hub drive flange
-
08-30-2011, 02:44 PM #2
Senior Member
- Join Date
- Aug 2009
- Posts
- 668
we had a similar problem. we just put some blue loctite on them and they are fine.
-
08-30-2011, 03:17 PM #3
Senior Member
- Join Date
- Jun 2007
- Posts
- 3,123
Ours are safety wired. What are you torquing them to?
Wilwood calls for 42 ft/lbs.
-
08-30-2011, 05:04 PM #4
Member
- Join Date
- Nov 2009
- Posts
- 30
Maybe a bent axle housing
-
08-30-2011, 09:27 PM #5
Senior Member
- Join Date
- Dec 2007
- Location
- Michigan
- Posts
- 220
We had the same issue a couple of years back. I ended up doing what was mentioned above and blue loctited them. No problems since.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 02:54 AM.
Bookmarks