|
|
-
Micro-Armor family of greases, spray lubricants, and oil products
Who’s using Micro-Armor in Dirt Racing ?
Barry Wright Chassis
Bob Pierce Chassis
Lazer Chassis
Rick Eckert – 2011 World of Outlaws Dirt Late Model Points Leader
Shannon Babb – 2011 Dirt Late Model Summer Nationals Champion
Mike Harrison – 2011 Dirt Modified Summer Nationals Champion
Dustin Griffin – 2011 Dirt Pro Late Model National Points Leader
Rusty Schlenk – 2010 Dirt Late Model National Champ & Back to Back Oakshade Champion
Jason Feger – 2010 Dirt Late Model Summer Nationals Champion
Jonathon Davenport
Tim McCreadie
Steve Francis
Chub Frank
Brian Shirley
Billy Moyer Jr
Ryan Unzicker
Brandon Sheppard
Jack Sullivan
Jon Henry
Jeep VanWormer
Brian Ruhlman
Dona Marcoullier
Brandon Thirlby
What Are YOU Waiting On ? Get your Micro Armor Today!
“I’ve won a lot of races using Micro-Armor Technology. In my position I have the ability to test and evaluate just about every grease and oil out there. I’ve lowered race engine temperatures 20 degrees just by adding Micro-Armor. There’s nothing on the market like it.”
- Charlie Langenstein, 5 Time Nascar Champion, Mechanical Supervisor for Hendrick Motorsports
“I’ve personally tested Micro-Armor’s solid-film lubrication technology in both my race cars and my own vehicles. By reducing friction, I’ve seen Micro-Armor drop temperatures and increase performance and fuel economy. It really does work!”
- Dave McMillan, Indy Car Crew Chief, 02 Racing Technology
See what our customers have to say
The Micro-Armor family of greases, spray lubricants, and oil products utilizes our patented, “micro-particle” additive technology that reduces friction beyond the capabilities of the greases and oils you are currently using. Unlike other lubricants, the patented Micro-Armor technology uses unique and patented, solid film lubrication to smooth metal surfaces and dramatically reduce friction in your metal parts, therefore reducing heat and surface wear, while improving performance. Engines perform better, transmissions and rear end gears run smoother and cooler, and wheel bearings roll more freely. Heims don’t squeak. But even better, your parts won’t wear out so Micro-Armor saves you a ton of money!
The Micro Armor list of Racing names is growing daily.
If it works this well at the track, just imagine what it can do for YOU and your personal vehicles!
-
We now have Rusty Schlenk Shirt in the store
http://www.microarmorracing.com/store/
-
MicroArmor Customer Review
--E.W., Marysville, MI
"This letter is to inform you of the results we've had using Micro-Armor products. We run 12 mixer trucks:
3 International 9.0 liter dt/dti-466c turbocharged engines
9 Mack 6 cylinder dm600s, 11.0 liter engines
We also have 1 Cat 966D loader, and 1 Komatsu W120.
As you know, our mixer trucks operate in an environment filled with very fine, abrasive dust particles. At the end of May we began introducing Micro-Armor 1000 Oil Treatment into the engine oil. Later on in the summer we began putting it into the rear ends, transmission, power steering, axle bearings, and into the hydraulic systems. The results varied truck by truck, but we experience more power, increased RPMs, , apparent increase in fuel economy, lower operating temperatures and the engine oil staying tremendously cleaner between changes.
Oil consumption was substantially reduced in those units which burned oil - so much so that the savings in oil is greater than the cost of the Micro-Armor used in those units.
Finally, we have started using the Micro-Armor 4000 penetrating spray on door hinges and locks and other areas, and have found that the lubricating effect lasts from 3 to 4 months in this dusty environment.
We are firmly convinced of the many ongoing benefits of the Micro-Armor Technology and Products."
http://www.microarmorracing.com/store/
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 07:01 AM.
|
|
Bookmarks