Results 1 to 10 of 10
  1. #1

    Default Flat roof versus Curved roof??

    Ive got a question for any aerodynamic buffs out there, with the roof on a late model being such a large amount of surface area , is it possible for a curved roof to make lift?? We had one on the car that basically had an airplane wing profile to it. This seems like the wrong way to go?? What do you guys think?

  2. #2
    Join Date
    Nov 2008
    Posts
    359

    Default

    I guess it would be possible, but the rounded roofs are designed to put more air on the spoiler. Now, if you have rules that allow a flat roof with angle in it you essentially have a huge spoiler right on top of your car.
    Now for the down side of that, we went and raced years ago where they allowed "Outlaw" lates to run a sprint car type wing on the top. The cars had so much down force that my driver said it was bogging the car down so he took it off. He subsequently was so much faster then everyone else without it they couldnt touch him. So in conclusion, is the benefit worth the drag? Thats a question I cant answer because we have run both flat and curved and really didnt notice any difference.

  3. #3
    Join Date
    May 2007
    Location
    Batavia, OH
    Posts
    13,636

    Default

    Quote Originally Posted by racer241 View Post
    Ive got a question for any aerodynamic buffs out there, with the roof on a late model being such a large amount of surface area , is it possible for a curved roof to make lift?? We had one on the car that basically had an airplane wing profile to it. This seems like the wrong way to go?? What do you guys think?
    A curved roof WILL create lift. It does not "lead air to the spoiler". I have driven the same car back to back with a humped up roof and one that was close to flat. It made a very noticeable difference.

    If you are racing against a guy with a flat roof, angled downward to the front, he is cheating you big time if the rules do not allow it.
    Modern Day Wedge Racing
    Florence -2
    Atomic - 1

  4. #4

    Default

    Thanks for the replies, any other input would be much appreciated, changing around the roof/sail configuration just hoping it helps it haha. Its a home-made aluminum roof came with the car curved, I'm flattening it plus curving the left sail and A pillar to give a cleaner shot back to the spoiler

  5. #5
    Join Date
    Aug 2009
    Posts
    1,088

    Default

    Quote Originally Posted by MasterSbilt_Racer View Post
    A curved roof WILL create lift. It does not "lead air to the spoiler". I have driven the same car back to back with a humped up roof and one that was close to flat. It made a very noticeable difference.

    If you are racing against a guy with a flat roof, angled downward to the front, he is cheating you big time if the rules do not allow it.
    Hmmm sorta like a flat roof with the right frt. corner dropped 1 1/2" huh?

  6. #6
    Join Date
    Aug 2009
    Posts
    1,088

    Default

    Quote Originally Posted by hpmaster View Post
    Hmmm sorta like a flat roof with the right frt. corner dropped 1 1/2" huh?
    Then use a 88 or 90 on the left front as a "loading" or pit tire and a 92 to race on.

  7. #7
    Join Date
    Oct 2007
    Posts
    354

    Default

    A RCR aero guy told me that Flat roof on a car with no windows and a curved with windows.... Look at the Team Dillon car Flat Roof.

  8. #8
    Join Date
    Nov 2010
    Location
    Lock Haven, Pa
    Posts
    664

    Default

    For it to create lift, it would have to have a smooth flat piece on the under side. What creates lift is the reduction of pressure caused be the air being disturbed by having to go over the curved top and the undisturbed air going under. So unless the you can smooth out the air going under the roof, it won't create lift.

  9. #9
    Join Date
    May 2007
    Location
    Batavia, OH
    Posts
    13,636

    Default

    Quote Originally Posted by dirttrackrocker View Post
    For it to create lift, it would have to have a smooth flat piece on the under side. What creates lift is the reduction of pressure caused be the air being disturbed by having to go over the curved top and the undisturbed air going under. So unless the you can smooth out the air going under the roof, it won't create lift.
    If air is going around a curved surface, it creates lift. The air on the underside would have to be displacing the same amount in the vertical direction for no lift to occur. A boxed in smooth bottom just makes the lift coefficient bigger.
    Modern Day Wedge Racing
    Florence -2
    Atomic - 1

  10. #10
    Join Date
    Dec 2008
    Posts
    374

    Default

    thats the reason you see the cars with a curved roof with a lip at the back sticking up . that lip take the lift out, it works like the elevators on a airplane wing.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 09:27 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.