-
Quick change tube bolts
Does everyones bolts come loose and or strip out? If so what do you do?
Chris Zogg
-
I used red Loctite and torqued them according to manufacture's specs and haven't had any problems. If you stripped the threads out, I would just drill and tap one size larger and use proper torque specs.
-
Zogg just drill the holes out to 3/8 and install a bolt and nut . Put the bolt head inside the tube and the nut on the outside . I do all quick change tubes that way even new ones .
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 12:04 AM.
Bookmarks