can i ream my spindles

[rathole7]

im installing different lower arms on my grt and the screw in ball joints only come in the larger size can i use the reamer i have (left over from my street stock days) to enlarge the hole or should i buy new spindles?

[MasterSbilt_Racer]

If you have the proper tapered reamer, go for it. I have done it many times.

[fox1162002]

Done it for years also on several cars. Just watch the depth and don't go to far.

[GRT85c]

The other option is to get some rebuildable balljoints (i.e. Howe). That way you can just get the correct stud for your application.
Hope this helps!
Tim

[mqdirtracer57]

QA1 makes a screw in ball joint with the correct pin for a GRT...part # is 1210-102