Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2012
    Location
    georgia
    Posts
    13

    Default metric car setup

    the rules just came out and they are allowing us to now run racing springs and adjustable cups.what springs should i run and is there anything i can do with my rear trailing arms. should i take off my sway bar or not.car weights 3400lbs got to run street tire i run 245/60 and 255/60 bfgs.any help would be appr.

  2. #2

    Default

    Rf 900 lf 1000 rr 200 lr 250 take sway bar off redrill ur top arms for pinion angle 6-8 put ur lowers as close up to the rearend housing as u can
    Demon Chassis

  3. #3
    Join Date
    Jan 2012
    Location
    georgia
    Posts
    13

    Default

    well i was goin to buy a set of the adjustable trailing arms for the top and how can i move the bottoms up do i need another bracket or can i re drill. thanks for the help

  4. #4

    Default

    Yes u can jus redill
    Demon Chassis

  5. #5
    Join Date
    Jan 2012
    Location
    georgia
    Posts
    13

    Default

    thanks for the help and i mis read the rules its 3200 does that change anything

  6. #6

    Default

    No u can go softer on both front springs iv went down as low as 750 on the rf at 3400 jus dont let people tell u it wont work it works great
    Demon Chassis

  7. #7
    Join Date
    Jan 2012
    Location
    georgia
    Posts
    13

    Default

    do i need to keep the 100 pound split

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 01:13 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.