Rocket Birdcage Location

[DK1]

I just bought a brand new set of TWM birdcages for my Black front end Rocket. I previously had the liner style. I also had new tubes installed on my QC.

I'm looking for the measurement of the birdcage location on each side?

[tw50]

outside of rotor to shock mount 8 3\4 on left 8 1\4 on right

[DK1]

Where do I measure to on the birdcages?

[AmickRacing]

I'm 99% sure you measure to the center of the shock mount

[bsm126]

Is there a measurement for the right side birdcage?

[DK1]

I called Rocket and this what I was told:

Left side should be 8 7/8
Right side should be 8 1/8

Measuring from OUTSIDE of rotor to the center of the shock mount. Shock mount should be on the outside of the mount closest to the wheel. All the bars should mount on the inside of the mounts.

[ABAtester]

Are those measurements based on the 62.5" wide rear end with right side 3.5" longer than the left?