Lots for 2300 Esslinger parts SVO head, (2) goldstar setups, crower roller cams

[dishmans2]

(6) good 2.3 blocks. $50 ea
(1) block race ready bored .30 over SOLD
(4) cranks $25 ea
(2) front pans with baffles and tray $125ea
*SOLD* Esslinger Race rear sump pan with crank scraper with pickup tube $200
http://www.esslingeracing.com/mercha...gory_Code=OLPN

(1) 2.0 block/head with rear sump pan $100

A few transmissions $100 ea

Esslinger SVO Alum head 12.5 compression (head needs re-assembled)
Esslinger Port matched intake w/Holley 500 (Earl Parker Carburation Stage III)
Esslinger 1 steel billet cam .620 lift w/cam card
Esslinger 1 steel billet ARCA cam .658 lift w/cam card
New valve springs, roller rockers, valves, titanium retainers.
$2000 shipped for the head and your choice of cam with the port matched intake w/o carb.

2 sets of ARP head studs. $50 ea set
1 set of ARP main stud. $50
1 set of Chromoly main studs $40

Lots of new pistons rings, rod and main bearing 2.3 and some 2.0 ALL namebrand ACL/Clevite $150 for the lot.

New crower 5.7 rods and like new 5.7 wiseco .30 over pistons $300

1 set of like new manley 5.7 rods. $185

2 .40 over wiesco pistons for 5.7 rods. $40 shipped

(2) Complete Goldstar 7# flywheel/clutch assembly’s race ready 23spline $450 shipped
http://www.esslingeracing.com/mercha...egory_Code=FLY

(1) Billet Esslinger Auxillury Shafts w/ changeable gears $150

Probably more just have not got everything out. These are the big ticket items. I want to sell everything together. I have all of Mission machines build sheets for reference that will go with it too. From San Antonio, Tx

SOLD -- I also have a Esslinger destroker knife edge crank 2.3 to 2.0 that was $1700 new that I will sell separate for $350. Stroke is 2.750 and must be used in a pre-89 large journal block. STD or .010 main and rods I cannot remember. With .030 over pistons the final cc will be 2057.

9" rear end pumpkins / gears and all the 8" rear end pumpkins with 5 different gear ratios.

Would like to sell everything at once but the aluminum head will be the last to go.

We ran the best parts available!

Also have a pinto less motor that ran 16.7 in Kyle, TX asphalt.

PM (prefer pm) I am school teacher and do not have alot of free time or call with any questions on parts and price. I will take pics of the requested items.

PAYPAL ADD 4%.

Thanks
Bryce
210-827-4430
Located in Devine, Tx 78016

[dishmans2]

Bump now with prices. Thanks

[dishmans2]

Some new prices on the goldstar setups and SVO alum head.

[grydergeyer26]

give me a call on goldstar 5306240254

[Dan32]

doyou still have how much for one? call 678 878 9785 thanks dan

[dishmans2]

Just SOLD everything but 1 roller cam.

Esslinger 1 steel billet ARCA cam .658 lift 5000-8800rpm range 108 centerline. $250 shipped.