Results 1 to 4 of 4

Thread: Wedge ?

  1. #1
    Join Date
    May 2011
    Posts
    28

    Default Wedge ?

    OK, I do not have access to a set of scales at this time. So I am checking my setup with the jack and socket method. The car is a mono leaf mod with a lift-bar. When I jack it up I get roughly an inch and a half maybe 2 inches of wedge. Where would this put me as far as cross-weight? Any help is appreciated.

  2. #2
    Join Date
    May 2010
    Posts
    632

    Default

    Guessing about 100 lb or just over, how do you like the mono leaf car ? I used to have one.

  3. #3
    Join Date
    May 2011
    Posts
    28

    Default

    LF = 650
    RF = 600

    Have not had the car on the track yet. I have ran stacked leaf cars but this is my first venture with a mono leaf car. Thanks to both for your help!

  4. #4
    Join Date
    May 2010
    Posts
    632

    Default

    On my car when the track was tacky or heavy, I did very well against the 4 -bar cars. On a slick track couldn't get the bite like a 4 -bar car. So I floated the RR, added 2 front halfs of a leaf spring to the Left side and removed the fifth coil, then I had more forward bite.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:00 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.