415 chevy Aluminum Dart pro 1 heads

[In The Groove]

I have a 415 steel bowtie block with fully ported aluminum heads and intake, titanium valves, PSI springs, jesel pro series shaft rockers, comp roller cam, Crower lifters, callies crank, oliver billet rods 6 inch, Dome pistons, 9 quart canton pan, CV products pulleys, CV products fuel pump, MSD disturbator and Scott wires. Motor has 100 laps on it 14.5 to 1 compression dynoed at 700 HP. I ran the motor in a couple of VRS late model races but the series ended last year and I no longer need it built by JR. Wesigarber of Phantom Race engines.

Priced to sell $9,500


865-207-4343

Close to Knoxville TN

[In The Groove]

need to sell starting new steel head motor

[TXRP]

Is this an all new engine? If not how old are the parts. Thanks

[In The Groove]

Block is 3 years old crank new rods new pistons new heads and intake couple years old new valve springs rockers and valves new when heads were not many laps on any of it give me a call for details.


George
865-207-4343

[perfconn]

George and Jr are both personal frinds of mine and you can take what he says to the bank.Everything George says is true.I have already had a set of steel heads and intake done for him for his new steelhead engine.

[perfconn]

Bad ass engine and more than you will ever need on an 8 inch tire car

[In The Groove]

Thanks Terry this would make someone a good motor JR Weisgarber built this engine he also built the engine that Ricky Armes runs they are good driveable and reliable horsepower no coners cut on this enigne.

George

207-4343

[perfconn]

Still for sale.

[In The Groove]

need to sell lets deal


865-207-4343

[In The Groove]

still for sale willing to deal.

George

865-207-4343

[In The Groove]

to the top

[In The Groove]

to the top

[In The Groove]

to the top

[In The Groove]

Sold Thank you