Results 1 to 10 of 10
  1. #1
    Join Date
    May 2007
    Posts
    179

    Default KB Claimer piston compression issues

    Running KB Claimer pistons .465 dome true 14-1 comprssion (alky). Engine is down on power, did compression test cold and only had 150 psi. So i warmed the engine and it dropped to 120 psi!!! Shouldnt it easily be 200-220? With these pistons/alky/bore the ring end gap factor is .03248 comp ring gap which i set at .033. Engine has 7 races on it but only 2 since it sat for 3 years. Im guessing the rings are gone? Anyone else run these pistons/have this issue? Thanks

  2. #2
    Join Date
    Jun 2010
    Location
    Santa Land
    Posts
    554

    Default

    Sounds more like a valve spring problem. A leakdown test will confirm.
    My sarcasm is a pre-emptive strike to your stupidity!!

  3. #3
    Join Date
    May 2007
    Posts
    2,319

    Default

    Would need cam specs to guestimate.
    BUCKLE UP NOW, YA HEAR?

  4. #4
    Join Date
    May 2007
    Posts
    179

    Default

    Advertised Duration (Int/Exh): 304/312
    Duration @ .050 (Int/Exh): 268/276
    Gross Valve Lift (Int/Exh): .576/.586
    LSA/ICL: 106/102

    Could the valve lash be a tick tight?

  5. #5
    Join Date
    May 2007
    Location
    PA
    Posts
    844

    Default

    With that big of a cam, that compression reading is about right. What size engine is this? Cam seems really big, low to mid 260's with about 4* split would really liven the thing up. Give some more details of the combo, heads, intake, CI. A better check of engine health would be to perform a leak down check.
    Josh K.

  6. #6
    Join Date
    May 2007
    Posts
    179

    Default

    .060 350, dart platinum 230cc, 64cc 2.08/1.6. Victor jr intake.Yes i know heads are to big but this thing was running insane and stupid fast. 7 races since freshened (cracked block)

    What do u mean by mid 260's & 4* split? Duration? Lsa?

    Power loss im feelin- last week in the heat was wet slick only turned 7k rpm should of been bouncing of the rev limiter set at 8k ( ive turned this motor 9400 on a 1/2 mile track with no issues) this is a big 3/8 track and im running a 6.00 gear! The main was slick up top and i only turned 7200 and car wasnt spinning tires. The engine hit 7600 in the shop but obviously no load on it! It feels like i lost 100 hp on the track.This is in a mod 4/4. Wanted to run tonight but thought about tearing it down to see if i can find anything!
    Last edited by Kojak_9x; 06-23-2012 at 10:47 AM.

  7. #7
    Join Date
    May 2007
    Location
    Glasgow, Kentucky
    Posts
    4,852

    Default

    KB claimer pistons over 9000???? You more than likley killed the pistons.

  8. #8
    Join Date
    May 2007
    Posts
    179

    Default

    Dont want to argue with what i should be running. Just looking for help with current issue. That was prior to being freashened everything checked out. Have to run 8k chip now USRA rules.

  9. #9
    Join Date
    May 2007
    Posts
    179

    Default

    Well i feel like an idiot!!! I have a double adjustable gas peddle and the arm cam lose just enough that it wasnt opening the trottle all the way!

  10. #10
    Join Date
    Mar 2008
    Posts
    766

    Default

    hey at least it was an easy fix sometimes crap like that you will chase for a month
    my daughter my sailor my hero the next greatest generation is our men and women now in harms way Pray for them

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 08:38 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.