Anyone know of anything that would cause the Pinion to leak grease besides the pinion seal? Changed the seal twice in the past 3 weeks and it still leaks!
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 6 of 6
Thread: Winters Quickchange Question
-
08-07-2012, 11:29 AM #1
Member
- Join Date
- Aug 2012
- Posts
- 45
Winters Quickchange Question
-
08-07-2012, 03:29 PM #2
Senior Member
- Join Date
- May 2007
- Posts
- 192
Put some silicone on the bolt that holds the yoke on.
-
08-08-2012, 03:10 PM #3
Member
- Join Date
- Aug 2012
- Posts
- 45
Its pooling up in the seal, leaking from the two rings around the pinion shaft!
-
08-09-2012, 06:11 PM #4
Senior Member
- Join Date
- Feb 2008
- Location
- colchester il.
- Posts
- 2,172
would add make sure the vent is working sometimes gear lube seats in the fulltube/vent and wont let the gear case breath so it pushes gearoil out at the next easiest spot a seal.
Originally Posted by JAMESGANGRACING
-
08-09-2012, 10:59 PM #5
Senior Member
- Join Date
- Feb 2009
- Location
- katy tx
- Posts
- 99
when you pull the seal out is there a cover on the bearing or can you see throw it if you can see throw it you need to change it i had the problem with mine put some silcone on the washer and bolt it up
-
08-21-2012, 01:54 PM #6
Member
- Join Date
- Jan 2011
- Posts
- 43
Make sure you are using the correct seal, they make them with the lip facing in and out depending on which way your seal installs.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 12:23 PM.
Bookmarks