Results 1 to 13 of 13
  1. #1
    Join Date
    May 2007
    Posts
    125

    Default rear spring question

    We run a 76 monte frame shortened to a 110" wheelbase we run a 1100 rf 1000 lf we have tried multiple combos on rear cant get bite off the corner.Car handles great getting in and thru the center but wont hook up coming off.We have 54% rear 51% left, around 53% cross the car weighs 3400 full of fuel with driver we have tried a lot of different springs on rear with not much change.Any help would be great..

  2. #2
    Join Date
    May 2007
    Location
    Auburn, IL
    Posts
    2,854

    Default

    How much bite is in the car?

  3. #3
    Join Date
    May 2007
    Posts
    125

    Default

    Quote Originally Posted by ToddSmith16 View Post
    How much bite is in the car?
    bout 125 lbs.

  4. #4
    Join Date
    May 2007
    Posts
    150

    Default rear springs

    Quote Originally Posted by keeter57 View Post
    We run a 76 monte frame shortened to a 110" wheelbase we run a 1100 rf 1000 lf we have tried multiple combos on rear cant get bite off the corner.Car handles great getting in and thru the center but wont hook up coming off.We have 54% rear 51% left, around 53% cross the car weighs 3400 full of fuel with driver we have tried a lot of different springs on rear with not much change.Any help would be great..
    What rear springs do you have now?
    Have you thought about increasing the
    L.S. weight to 54% ?

  5. #5
    Join Date
    May 2007
    Posts
    125

    Default

    yes we are gonna do that this week,225 lr,200 rr.we were running forever with 51% rear and added a 32 gallon cell for more weight but lost our ls weight so we figured we would put it back and see what happens.just didnt know if we needed to up the spring rates since the rear was heavier.

  6. #6
    Join Date
    May 2007
    Location
    Auburn, IL
    Posts
    2,854

    Default

    get closer to these numbers and you will be surprised....53-54% left side, 54-55% rear and 185-200lbs of bite! With it weighing over 3200lbs I would make LR spring 275lb and RR 225lbs. Good Luck!

  7. #7
    Join Date
    Dec 2010
    Posts
    104

    Default

    Like ToddSmith16 says.

    We even run a 300 LR with a 225 RR and 300# for bite. Tight setup but if you learn to drive it hard from mid turn out she really grabs and goes.

  8. #8
    Join Date
    May 2007
    Posts
    125

    Default

    thanks guys we will give it a shot..

  9. #9
    Join Date
    Jan 2010
    Location
    Texas
    Posts
    113

    Default

    With that much bite isn't it going to make it very loose getting in ?

  10. #10
    Join Date
    Dec 2010
    Posts
    104

    Default

    With ours it never does seem to get loose on entry. Even with 300 for bite.

  11. #11
    Join Date
    May 2007
    Location
    Auburn, IL
    Posts
    2,854

    Default

    Well Keeter, How did it go?

  12. #12
    Join Date
    May 2007
    Posts
    421

    Default

    This thread is amusing.

  13. #13
    Join Date
    May 2007
    Posts
    125

    Default

    havent got to try it yet RAIN at one track and cancelled due to drought on the other ,go figure!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 05:36 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.