I know it has been asked - but here goes again.
4.125 bore, iron block and aluminum head. Fel-Pro 1004 or 1034 ??
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 4 of 4
Thread: Head gaskets
-
09-29-2012, 05:56 PM #1
Senior Member
- Join Date
- May 2007
- Posts
- 240
Head gaskets
-
09-29-2012, 07:07 PM #2
Senior Member
- Join Date
- May 2007
- Posts
- 3,436
1034 Fel Pro
-
10-03-2012, 05:33 PM #3
Senior Member
- Join Date
- Sep 2009
- Posts
- 407
So what would be the problem with a 1003 if it didn't hang over on the head. More gasket material between cylinders.
-
10-03-2012, 05:47 PM #4
Senior Member
- Join Date
- May 2007
- Posts
- 3,436
1003 will work.The 1034 is just better.The gasket between cylinders doesn't make much difference.The metal fire ring is what seals the compression.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 08:15 PM.
Bookmarks