-
2 barrel pistons
whats a good piston to use? i see light weight pistons that say they are good for up to 400 hp, but i was thinking that is kind of low? is a 383 with a gauge legal VDL carb going to make more then 400 hp? motor rules are basically open aslong as you have a gauge legal carb and cast iron heads and block. planning to run Iron eagle 64cc heads. dont know the runner off the top of my head.
-
Originally Posted by
newguy
whats a good piston to use? i see light weight pistons that say they are good for up to 400 hp, but i was thinking that is kind of low? is a 383 with a gauge legal VDL carb going to make more then 400 hp? motor rules are basically open aslong as you have a gauge legal carb and cast iron heads and block. planning to run Iron eagle 64cc heads. dont know the runner off the top of my head.
Which 2bbl are you referring to? The 350 or 500?
And open rules meaning roller cam??
-
its a VDL guage legal 4412
-
Originally Posted by
newguy
its a VDL guage legal 4412
Assuming you are referring to a flat tappet cam.
A good engine builder will hit 520 hp easy. I have seen guys run the 2 bbl LW pistons. If you need the motor on kill, get the very best pistons sold. I dont spend money that way.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 03:10 PM.
Bookmarks