Speedway sells a rotor and the pinto spindle could be used. Not sure but I would think since you can put a metric rotor on a pinto spindle maybe you could the other way. Only problem I see though is spending too much pulling anything off besides a redrill would offset the savings for the wheels.
I had a 5 x 4.5 hub on my car when i bought it, i know their out there might be 78-79 maybe. Might be able to go to the parts store and have them look up hubs for metric cars from different years and see if they can see if it says 4.75 bolt pattern or 4.5.
Bookmarks