Results 1 to 3 of 3
  1. #1

    Default Spindle question?

    If I put a spindle on my car that is 2" shorter height from my stock spindle, and the steering arm is 1.5" shorter than stock. What should I expect? Should I change other things in the suspension?

  2. #2
    Join Date
    Feb 2008
    Posts
    259

    Default

    you should expect a LOT faster camber gain/change. This could make that wheel more sensitive as far as dialing in the initial static camber/caster settings to get the best tire contact patch after dive and roll.

    I would think a good tire temp pyrometer would be a MUST if you were going to do this.

  3. #3
    Join Date
    Jul 2009
    Posts
    159

    Default

    that wont work on the left front,bumps too far off,roll centers too far right,and static camber would be terrible.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:58 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.