Results 1 to 6 of 6
  1. #1

    Default mustang lower control arm

    I have a 1980 model foxbody mustang and I was wanting to know if they are a longer lower control out there so I can get a little more camber. I already have caster camber plates but I can only get -4 camber on the right side and it isnt enough.

  2. #2
    Join Date
    May 2007
    Location
    Thurston, OH
    Posts
    915

    Default

    Rules permitting, add some length to the lower arm? -84Dave-

  3. #3
    Join Date
    Jan 2012
    Location
    Lakeland, Florida
    Posts
    26

    Default

    I've heard '89 and up the lower right a-arm is longer. I don't know for sure but maybe someone on here can answer if it's true.

  4. #4
    Join Date
    May 2007
    Location
    Medford, OR./Tulare, CA
    Posts
    1,063

    Default

    The T bird lower will work too. It is longer.
    dr6 motorsports

  5. #5
    Join Date
    May 2007
    Location
    sunshine state
    Posts
    93

    Default

    95 and up lca's are 1 inch longer and yields roughly 6 degrees of negative camber, with a stock type upper strut towers.
    mark41

  6. #6
    Join Date
    Jul 2008
    Location
    CARSON CITY,NV
    Posts
    96

    Default

    stock fox body is 13" from centerline to ball joint center the 89 svo has 14" center to center and i believe the tbird is 13 3/4
    Miller

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:30 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.