Results 1 to 9 of 9
  1. #1

    Default 406 sbc trade for a 9" floater

    I have a 400 sbc bored .030 over, scat crank, scat forged I beam rods, flat top pistons, 480int 494exh 106sep hydraulic cam, and balanced by van senus. Its very fresh. Only raced it 4 times in ump class then stepped down to pure street class. I will trade short block for a ready to bolt in to metric 9" floater with disc brakes. I'm from nw indiana
    Last edited by TRIFLYNN83; 12-31-2012 at 05:46 PM.

  2. #2

    Default happy new year

    Happy new year.

  3. #3

    Default iv got a 9"that came out of a 3-link modifed id trade you

    has disk brake set up

  4. #4

    Default

    What gear what length

  5. #5

    Default 9 in

    my floater is 60 in./ 2in offset

  6. #6
    Join Date
    Apr 2009
    Location
    Macon IL
    Posts
    268

    Default

    Quote Originally Posted by circletrackjack View Post
    my floater is 60 in./ 2in offset
    the 60 in 2 in offset wont work in a metric car only a mod

  7. #7
    Join Date
    Jan 2013
    Posts
    21

    Default mod 9"

    i have a 9"floater with rotors calipers,583 gear.with coleman hubs.would like to trade you.located by warsaw in.came out of 4 bar mod

  8. #8

    Default trade

    I still have motor for trade. It is complete right now with dart heads and dart intake so you can hear it run before I pull the heads off. I will deliver if distance is within reason. Looking for 60" centered

  9. #9

    Default

    Still have motor

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 10:11 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.