Just opened up a box of sealed power rings for SBC. The top ring has no taper or marking. Anyone have a clue?
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 5 of 5
Thread: Sealed Power Ring Help
-
01-17-2013, 06:29 PM #1
Senior Member
- Join Date
- May 2007
- Location
- Central IL
- Posts
- 519
Sealed Power Ring Help
-
01-17-2013, 06:47 PM #2
Senior Member
- Join Date
- May 2007
- Location
- PA
- Posts
- 844
Rings should've came with a set of instructions, but generally rings with no dimple or taper, can be installed either way.
Josh K.
-
01-17-2013, 10:25 PM #3
Senior Member
- Join Date
- May 2007
- Posts
- 595
Soundss like you have a set of cast rings.
-
01-18-2013, 01:02 PM #4
Senior Member
- Join Date
- May 2007
- Location
- Central IL
- Posts
- 519
CNC so are these junk? I called Fed Mogul and they said they were packaged wrong. Should be a dot and a taper.
-
01-18-2013, 02:11 PM #5
Senior Member
- Join Date
- Jun 2007
- Posts
- 762
The ones that are not marked are square cut and can go either direction.
Last edited by 500BOMBER; 01-18-2013 at 02:14 PM.
Old enuf to know better, still too young to givadamm.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 06:02 AM.
Bookmarks