Brake pads?

[ultramax25]

needing new pads,any stock type comparable with the performancce type? is there a big difference? 3/8 semi banked,tacky-semi slick. just needing some input??? Thanks

[imca43]

I needed some and couldn't get any sent to me before a race so I got a set of the napa ceramic pads cost me $90 went through the break in process and they were no good no stopping power when I came in from the main rotors were glowing. I have had good luck with the hawk blacks they are worth the money. I run on a big 1/4 with a lot of bank and sweeping corners.

[dirttrackrocker]

I'll 2nd the Hawk Blacks

[charcoal01]

Same here. Hawk blacks, just not in the rf

[andy29]

Hawk DTC-30 in rear and DTC-05 in the fronts best results used with new rotors!!

[Matt Eaton]

The blacks will kill the rotors. I use the DTC 30's.

[MM90]

All you guy's running LR brake floaters? Do you do anything different with pad setup running brake floater vs non brake floater?

[LM14]

Always ran Wilwood Polymatrix "C" or "D". No rotor wear but have great brakes.

SPark

[race21j]

Have used both blackhawk and wilwoods, both stop very well. Hawks are a little harder on the rotors.But that is a small price to pay for the stopping power.