Results 1 to 3 of 3
  1. #1
    Join Date
    May 2007
    Location
    Post Falls,ID
    Posts
    1,579

    Default 2300 Bronze Distributor Gears

    I know this isnt the classifieds,but alot more people are on this part of the forum...so on that note...

    I have 30 new Bronze gears left at $45ea shipped USPS Priority Mail

    You can PM me or call/text me at 208-625-1528
    No matter how hard you try...you cant fix stupid!!!

    If you build it right...it will turn left!!!

    www.raceidaho.com

  2. #2
    Join Date
    May 2007
    Location
    Medford, OR./Tulare, CA
    Posts
    1,063

    Default

    Erick, I have heard that the bronze gears do not do well on the stock cast shaft gear. Have you had good luck with them. I have never run a bronze gear and have only lost one stock gear, and that was because the pin sheared off, I never free rev the engine until it is at least 140 degrees and then when I do it, it is not too often. Other wise, I would try one.

    Dan
    dr6 motorsports

  3. #3
    Join Date
    May 2007
    Location
    Post Falls,ID
    Posts
    1,579

    Default

    we have run 2 with stock shafts for 2 seasons and no issues,the rest of our engines have the billet shafts...and again no issues.
    No matter how hard you try...you cant fix stupid!!!

    If you build it right...it will turn left!!!

    www.raceidaho.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 03:45 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.