Results 1 to 6 of 6
  1. #1

    Default Ceramic coated headers

    Are ceramic coated headers worth the extra $? Has any changed to them and noticed a HP gain or is it mostly just a looks thing?

  2. #2
    Join Date
    Oct 2010
    Posts
    422

    Default

    They are worth it if they don't get banged up. I think they make the headers last longer. Not sure how much HP you will gain, probably not much. It is hard to justify spending the money on ceramic coating when you could buy 2 sets of headers for the price of one with ceramic coating. My dad and I are going through the same conversation, we had some that were coated and they were awesome but that was on our stock car and the headers were protected unlike a modified. One accident and thats $500 in headers down the drain.

  3. #3
    Join Date
    May 2007
    Location
    in a van down by the river
    Posts
    1,893

    Default headers

    Quote Originally Posted by stock car driver View Post
    U can run chassis headers on your mod, I dont know why nobody does it?

    I can get headers ceramic coated any color for $150 a set here locally. I just had two sets of mine done (sponsored for free) that were both all rusty nasty and from 2005 or so. They look like new now!
    Can I send you a set of my headers to have coated!!!! LOL
    do they do the shiney silver?
    I think there should be lifeguards in the genepool.

  4. #4
    Join Date
    Oct 2008
    Posts
    160

    Default

    Be careful with shiney silver certain degreasers will make them look terrible!

  5. #5
    Join Date
    Jun 2009
    Posts
    358

    Default

    there's about a 1,000 ways to waste 150$ on a dirt car n ceramic headers isn't in the top 999 in my opinion. Support the headers good and they'll last a long long time, b4 they burn out, most likely get takn out in a wreck b4 actual burning out.

  6. #6
    Join Date
    May 2007
    Location
    in a van down by the river
    Posts
    1,893

    Default coating

    Quote Originally Posted by RUEF52 View Post
    Be careful with shiney silver certain degreasers will make them look terrible!
    You are right I had a set years ago that were jet hotted coated on one of my mods. Too much work to keep them clean on a dirtcar.
    I was hoping to get the set on my MACh 1 resto-mod done. It had a total of 350 miles logged in 2012. Sets on the lift n garage. Even though it is climate controlled I am starting too see a bit of corrosion starting.
    I think there should be lifeguards in the genepool.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 10:24 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.