Does anyone lubricate the axle before installation... Wondering more on the spool side
Just put a little grease on each end and you will be fine.
www.UltimateRaceCars.com
Originally Posted by racinjj Just put a little grease on each end and you will be fine. NO! use never-seize
Last edited by lazermod3; 03-06-2013 at 09:22 AM. Reason: spelling
you just got greased http://www.goddardwarrior.net
I use grease as well, never used to do anything but a top late model team said to use grease
Chris Zogg
Are you lubing axles with steel or aluminum spools? Or both?
Aluminum.........
I always lube the axles regardless of material type, its just good practice to make sure everythign moves as freely and possibly. Plus the grea wont damage anything if it mixes in with the gear lube.
Forum Rules
Bookmarks