U-Joint help needed

[ask0329]

I had to put a larger slip yoke in the car when i changed over to a 4-link this winter. Having trouble finding a u-joint. The yoke takes a 1.188 larger size and the drive shaft takes the smaller 1.126. Does anyone have a part number or can point me in the right direction? Thanks.

[Dirt Knife]

http://www.speedwaymotors.com/S44-13...oint,6988.html

[ask0329]

That ones too small. The yoke takes a 1 3/16 and the shaft is a 1 1/8.

[Dirt Knife]

http://www.therangerstation.com/Maga...08/ujoints.htm

Ref bottom of page
I think you have a 1410 series I do not think they make one for that yoke??

[ask0329]

pretty sure i found it. Napa PUJ 447 or Neamco 2-1153.

[oldfartracer]

pretty sure i found it. Napa PUJ 447 or Neamco 2-1153.

I think the joint you need is a precision joint number 348 that's the one you need hope this helps!