-
2010 Taylor Mod
I have a 2010 Taylor mod. Does anyone know what the base set-up is for taylor mods. I need ride heights,rear end placement forward and back also side to side. I have sent many e-mails to the taylor wedsite and no responce. Any help would be greatly appreciated. Thank you
-
-
Ride hieghts - lf 8" rf 7 7/8 from ground to center of lower a arm bolt lr 11 3/4 rr 10 3/4 to 11 from axel tube to bottom of upper rail. Left to right 16 1/4" from right side pull bar mount to inside of right upper rail j bar 5 to 5 1/2 up on chassis. Forward and back bars should be same on both sides 14" lowers 16" upper or 15" and 17" depending on witch ones u have.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 07:26 AM.
Bookmarks