Looking for a set of aluminum heads

[racin4]

Looking for a set of 23* alum standard port heads. Leave your number and I will contact you

[Dustejr73]

i have a good set of Dart Pro 1 alum heads with springs just gone thru...

Dave Duste jr
1-541-840-5764
dustejr73@gmail.com

[usafracer]

How much for the darts more details please!

[Dustejr73]

Dart angle plug PRO 1 alum, 2.08 intake, 235cc runners springs for a roller cam around 650 lift, just gone thru. we are IMCA now so i have to sell all my USRA stuff.....Jegs has them for 890 each so i want 1000.00 for both. thank you

Dave Duste'jr
dustejr73@gmail.com

[Ive got 5 on it]

i got what u need a set off brodix 11x 23degree heads fresh and ready to bolt on very good heads make ton of power i take 1200 for them got some more stuff if u need anything else 304 951 4552 thanks send me a text

[Dugger_17]

Call Greg Dugger, Ran on a 406 made good driveable power.

RHS Heads 200 cc Runners / cleaned up to 215 cc
Mild port work on head and bowls
64 CC Chambers
Milled .018 makes a 62 CC Chamber

618 936 2723

[tiptonfast1]

Set of #10 brodix roller rockers and girdles, standard port 64 cc 230 runner with matching brodix intake, fresh from Poncho Race Engines, $1400.00 Richard 904 806 3494

[stewie]

Dart CNC 227 Pro 1 heads. Angle milled 60 cc chambers. 2.08/1.6 Ferrea Comp. Plus SS Valves. Fresh valve job and resurfaced. Competition Cams roller springs w/ 10* titanium retainers. Ready to bolt on. $1400.00. 641-424-6200.

[Bill14]

Have a set of Edlebrock victor Jr. heads, port matched intake mfld. stud girdle, lash caps, Crane rockers, valve covers. 230 in. runners, 2.080 in. 1.6 ex. Isky roller springs. Rockers & springs have 40 laps on them. Intake valves have 40 laps & Ex valves had been replaced on previous valve job. Were run on my 421 & I sold the long block & the car. $1500.00 for all. Pay Pal accepted if necessary. Bill 815-429-3735