Rear rotors

[DANNY]

I ordered new rotors for my rear to replace the cracked ones I had. Just so happens that I got the wrong size instead of the 0.810 I got the 1.25 thickness.

They fit if I shave the pads down to about 1/8-3/16 little tight but should work it out or should I just say oh well better to "measure twice" and "order once" lol and get new ones that are the right thickness?

[MM90]

Are you running the pad spacers between the piston of the caliper and the brake pad? You shouldn't need them with the thicker rotors.

[DANNY]

No spacers just pads...

[Racingtech]

The piston needs to come out far enough for brakefluid to be behind it or you wont have good pressure on your pads

[sj valley dave]

Hi Danny...I would sell the 1.25 rotors and get the .810 rotors if you have calipers designed for the .810 rotor. Your going to lose a lot of pad thickness if you grind each pad off a 1/4 " to make up for the 1/2" difference...