Results 1 to 5 of 5

Thread: Carb help

  1. #1
    Join Date
    Sep 2010
    Posts
    140

    Default Carb help

    When I fire the motor it runs for just a split second and dies and will not re-fire until I give the throttle a squirt, after I get it going it idles fine. What's up with that? I'm thinking it may be jetted too rich. When I tore it down for a freshin up last year the pistons and heads looked way too clean like they were being washed down with gas, think this could be the problem?

  2. #2
    Join Date
    Jun 2010
    Location
    Santa Land
    Posts
    554

    Default

    That sounds more like a lean problem. Next time without touching the throttle give it a shot of gas down the throat of the carb and see if it fires.
    My sarcasm is a pre-emptive strike to your stupidity!!

  3. #3
    Join Date
    Sep 2010
    Posts
    140

    Default

    What's the problem if the gas down the hatch works?

  4. #4
    Join Date
    May 2007
    Posts
    3,436

    Default

    Turn the 4 corner idle screws out a 1/2 turn

  5. #5
    Join Date
    May 2007
    Location
    Auburn, IL
    Posts
    2,854

    Default

    Take both idle screws all the way in and then turn it 1 1/2 turns out.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 01:36 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.