Asphalt pull offs on 8" rims metric car

[3-6 Racing]

Planning on running a big show that allows pull offs but I only have 8" rims would they work on 8" rims and what problems could it cause if any

[RaceTechKs]

Yea you can run a 10 inch take-off on a 8 inch rim, You probably wont like the way it feels under you. If you can try to find some 8 inch take-offs and use them you will like those very well. If you can run a 10 inch wheel then your set....Just groove them up and needle them real good and they will work fine.

[3-6 Racing]

I live in NE Arkansas and unfortunately I run 5 on 4.75 or I have a set I could borrow

[rebel1mcelroy]

Run a 8 in. Asphalt pull off they are easier to mount and the tire wont roll over as bad

[DANNY]

U can mount the 10 inch easily by shooting starting fluid inside and lighting it, they pop right on 10 or 12 inch rims.

Lmao first time I saw someone do that I was like WTF?!?!?!?

It does work in a pinch and gives you some pressure in the tire too

[koltveitracing67]

Same way we used to mount semi tires................