Needing some imput on the front springs length on a metric car I'm building. Rules state it has to have the orginal factory control arms so that rules out the tubular control arms. I have put afco low friction ball joints and steel control arm bushings top and bottom with a 1022 afco easy up shocks but I put a 9.5 inch spring in it and now it sets way to low like almost on the bump stops on the control arm. So I was wondering what would be the best length to go with. Thanks for any help.
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 3 of 3
Thread: front spring help on metric car
-
11-01-2013, 10:54 PM #1
Member
- Join Date
- Feb 2013
- Posts
- 52
front spring help on metric car
-
11-02-2013, 09:13 AM #2
Senior Member
- Join Date
- Nov 2012
- Location
- Wisconsin
- Posts
- 3,119
After you figure your ride heights you'll need to install some spring spacers to get it right.
Last edited by Krooser; 11-02-2013 at 06:50 PM.
Member of the Luxemburg Speedway Hall of Fame
Class of 2019
-
11-07-2013, 01:19 PM #3
Member
- Join Date
- Oct 2007
- Posts
- 74
If you Listen to Stock car Driver, and read his posts on springs and rates you will be on the right track.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 02:27 PM.
Bookmarks