Results 1 to 7 of 7

Thread: clearance

  1. #1
    Join Date
    May 2013
    Posts
    19

    Default clearance

    What is the correct clearance between rocker arm and cam when lifter is fully collapsed.

  2. #2
    Join Date
    Jul 2007
    Posts
    154

    Default

    .035"-.045"

  3. #3
    Join Date
    May 2013
    Posts
    19

    Default

    Best lifter to use?

  4. #4
    Join Date
    May 2013
    Posts
    19

    Default

    Having trouble with head setup all together a walkthrough would be greatly appreciated

  5. #5
    Join Date
    Nov 2013
    Posts
    5

    Default

    Check out Esslinger engineering look in there tech sheets it takes a good day or more to set it up right. Most machine shops can't set up a 2.3 cylinder head right! I will set it up for a $150
    Last edited by robertazcar; 12-03-2013 at 05:17 PM.

  6. #6
    Join Date
    May 2013
    Posts
    19

    Default

    I will check into it anyone else have comments or consideration

  7. #7
    Join Date
    May 2013
    Posts
    19

    Default

    Any truth to .005 under the rockers on hla's?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 07:00 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2021 vBulletin Solutions, Inc. All rights reserved.