cam

[DANNY]

What would the most noticeable difference be between these 2 cams.

Cam builder recommended this.

253/260 @ 50
.363"/.362" Lobe Lift 106 LS

Engine guy told me to get this.

256/262 @ 50
.366"/.363" Lobe Lift 106 LS

All things aside what will I see different with one to the other?

[dereksehi]

There won't be a big difference between the two since the duration is within 3 degrees I would choose them by the type of tracks you run if you are running a small or paper clip track I would run the first cam it should have a little more bottom end if you are running a bigger track or track with sweeping corners go with the second it will hold it head up just a little longer on the top end.

[DANNY]

Ok it's a 362 with 220 runner heads.

Cam guy said I would be better off with first one rather then the one I was ordering from him in the first place.

He was pretty animate about it.

Track will be most likely be paper clip but there is the occasional chance for full big track as well.

[perfconn]

Cam grinders don't race.Call back to that same company and talk to a different salesman and you will get a different recommendation.

[avenger1]

exactly right, every single one of them will give a different recommendation