Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2009
    Posts
    18

    Default Racing Sell Out #1

    2 sets - Gun Drilled Axels 32.5" & 28.5" $100/set
    1 set - Axels 32.5" & 28.5" $75
    1 - Bert Magnesium Bellhousing w/ KSE pump Quartermaster starter with new belt $800
    2 - 3 speed tranny Shafts turned down for long snout/yoke $200/per
    1 - 3 speed tranny 1st gear removed $200
    1 - 3 speed tranny saginaw, truck transmission $100
    1 - 3 speed shaft turned down $35
    2 - 605 steering box $75/per
    2 - Real 3" beadlock Brand new in box, 5x5 chrome $150/per
    1 - Real 3" beadlock brand new, 5x4 1/2 chrome $150
    1 - Aero 4" beadlock brand new in box, 5x5 grey $100
    1 - MSD 6al box brand new in box $200
    1 - MSD 6al box used, MSD coil works $150
    1 - Alcohol Carb 1050 BLP, alcohol, with 1" Flow Design Spacer $700
    1 - Alcohol Carb 750 Demon, w/ 1" spacer $450
    1 - Alcohol Carb basket case, dissassembled Barry Grant 750 $125
    1 - DUI cap w/ module $70
    3 - BSB pinion mounts $40/per
    2 - Afco pinion mounts $25/per

    IMCA motor, 420 4-Bolt block, STD. 4340 Eagle crank & H-beam rods with ARP 2000 bolts. JE Pistons, comp flat tappet cam, Dart 230 heads, new Ferrea Valves 208-1.60, Kevco pan, Comp Rockers, Melling oil pump & pickup, Total seal rings, ATI balancer, KSE pump, Victor Jr intake. Completely freshened w/ 2 races. $5,000

    Open motor 408 Dart Block, STD. lightweight Crower Crank & Crower A-beam rods, comp roller cam, Protop line cnc ported heads, Jesel shaft rockers 2.125-1.60, Kevco oil pan, Melling oil pump & pick up, JE pistons, Total seal rings, ATI balancer, Victor Jr intake. Minimal races $$7,000

    Homemade Trailor w/ 2 row tire rack and aluminum diamond plate box (46” deep x 48” tall x 84” wide). Open floor, 23’ from end to end, pull out ramps, 4’ dove tail, 84” between fenders, 5,200 torflex easy use axels, 2” equalizer hitch, floor is 18” off ground, all LED lights, comes with title. $4,000 pictures available

    Travis Patch
    785-364-8070
    Holton, KS
    Last edited by patchracing; 02-04-2014 at 09:11 AM.

  2. #2
    Join Date
    Sep 2009
    Posts
    18

    Default

    Updated 2/4

  3. #3
    Join Date
    Jan 2010
    Location
    weston, ohio
    Posts
    47

    Default

    is the kse pump and tandum pump or just power steering? if its a tandum how much just for the pump

  4. #4
    Join Date
    Jan 2013
    Location
    Hamilton Co 4H Fairgrounds,Noblesville,IN
    Posts
    185

    Default

    Discover what veteran racers have known for years. Sell your unused racing parts that have set on the shelf for more than one year for fair market value and buy some parts that you can use in the upcoming year at one place,one time without all the hassles of annoying phone calls,shipping,tire kickers,etc. http://www.facebook....erracersauction 3/1/2014 Hamilton Co 4H Fairgrounds, Noblesville, In Contact us ASAP to reserve your lot numbers or Swap Meet Booth Lot numbers are limited so act today 317-443-0668, jwauctioneer@frontier.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 05:46 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.