Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default All Aluminum Brodix 422 Super Late model engine

    All aluminum brodix 18 degree 422 super late model motor. All aluminum brodix heads and block. Heads are cut to 15.5 degrees. Block is decked as well. Motor has less than 200 laps on it and works great. Details are:

    • Brodix Block & heads
    • 15:1 Compression
    • Jesel shaft rockers
    • 4-7 Swap Comp Cam
    • Comp Springs, Lifters & Titanium retainers
    • CP Pistons (4.165)
    • Lightweight 3.875 stroke crank
    • Bowtie Intake (port matched)
    • Moroso Crank Trigger
    • MSD Pro Billet distributor
    • CV Pulleys
    • Valvetrain oilers
    • Moroso Aluminum Dry Sump pan
    • Smith 850 carb w/ HVH spacer
    • Stainless Tri-Y Beyea headers w/ mufflers

    Asking $11,500. Email jacecresswell@gmail.com for more info, pictures, etc. The last rebuild included new pistons, rings, cam, lifters, springs, adjustable timing set, all bearings, retainers, locks, valve seals, gaskets as well as milling heads & block. Have the receipt for the last rebuild of $6,118.

  2. #2
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default

    Also willing to work out deal to have motor freshened up where I would pick up the tab on a refresh if someone is worried about buying a motor with a few laps on it. Nothing to hide here. Motor would be freshened up by reputable central PA builder. We can agree on an engine builder.

  3. #3

    Default

    what kind of horsepower?

  4. #4
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default

    Right on 800 hp but it can be dynoed again if you wanted to see it.

  5. #5
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default

    Price drop to $10,000. Can't buy the parts for this.

  6. #6
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

  7. #7
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default

    More pics...
    Attached Images Attached Images

  8. #8
    Join Date
    Dec 2007
    Location
    Carlisle, PA
    Posts
    204

    Default

    Still for sale. Save the lowball offers though. $8500 is not going to get it. The rockers alone are close to $2000. Carrillo rods with Carr-SPS bolts, Valve train oilers, etc. Do the math. This all Aluminum 800 hp for $10,000 is a steal.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 10:36 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.