Temp sender/guage location?

[Drake Racing]

I have an IMCA spec engine with cooling lines front to back in intake manifold ports.
My question is can I use water pump ports for dummy light and guage locations?
Trying to avoid using the riser under thermostat housing.


Curt Drake
IMCA late model #55x

[Krooser]

If you have a spot in the heads I would use that… I don't think the H2O pump is a good place for a temp sender...

[DANNY]

Don't the heads give a faulse reading?

[bobdoo]

Are'nt you only getting cooled water from the radiator at the pump

[perfconn]

No reason not to use an adapter under the thermostat housing.Everone does.

[Drake Racing]

Only reason I don't want to is it raises water neck above radiator, possibly trapping air, and intake is already plumbed front to back, so I would have to move cooling lines to adapter, and sensors to intake, not really a big deal but if I don't need to do it, I wont.


Curt Drake
IMCA Late model #55x

[let-r-eat]

http://www.summitracing.com/parts/hr...make/chevrolet

[perfconn]

You don't need to move the lines to the adapter,just put the sensors in the adapter.