Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2014
    Posts
    1

    Default Car tight on wet track

    I'm running a 3100# car with camaro clip and 3 link rear. Spring rates are lf 600 rf 650 lr 250 rr 200. With 52% rear weight 55% left. The car is very tight on entry on a wet tacky track. I can sling the car in but lose momentum in the middle. Car is fast during the feature but qualifies towards the back. I'm wondering if the front springs are too soft for a wet surface?

  2. #2
    Join Date
    Sep 2011
    Location
    Central IL
    Posts
    504

    Default

    Adjust brake bias to the rear. I am no expert on 3 link, so I will not advise on that haha, but I bet someone will post with the bar adjustment to make a 3 link looser on entry, brake bias is the easy way out, but it won't cure all your woes.
    #72W U.M.P Stock Car

  3. #3

    Default

    Try a 2" offset RR wheel. Pushing the RR out on a wet track makes it looser. As tuckin the RR in in the feature. Add a bit more stagger for the wet track heats. Grind the pads on the RF caliper. In a trapezoid shape taper the pads from where the hole is in the caliper, to the ends of pad. Will look stock, but also act like three wheel brakes.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:01 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.