stripped Rochester 2bbl jet threads

[bmodracer]

Buddy stripped jet threads out in the throttle body on his 2bbl Rochester that were tapped to use holley jets. Is there an easy fix or is the throttle body junk? It's a good C&S and would like to save it if possible.....thanks!!

[moose52]

http://www.blindrivetsupply.com/Reco...26.htmlI'm not familiar with the Rochester carb. So not sure if you have the room for a helicoil insert. If you do the above link if for a kit. Not a bad deal as the alternative would be tap oversize install a sleeve and retap the sleeve to the bastardized 1/4-32 Holley thread size. The tap from Holley is like 50.00! So the helicoil link would be my choice.

[C10]

Tap the thread holes out for holley jets prob solved

[bmodracer]

The carb was already tapped for Holley Jets before this happened.

[nguyenvinh2]

.....................................