Results 1 to 3 of 3
  1. #1
    Join Date
    May 2008
    Posts
    102

    Default IMCA late model....Parts sell out.....

    IMCA Late Model Sell Out
    All prices negotiable will package deal. Cash or credit card in person PayPal and shipping options also.
    Call or text 815 541 3544

    355 Ford IMCA spec engine 13 nights since fresh $5500
    2006 MasterSbilt Smackdown Frame with most body panels “no nose” $500.....SOLD
    SBF Brinn bellhousing no cracks or damage $275
    Fast shafts aluminum drive shaft 39” with u-joints and 6” yoke $150
    Reverse mount starter 8 nights old $125
    Barnes 5 stage dry sump pump, Peterson tank, all lines coolers belts and Oberg and filter assy. $1000
    IMCA SPEC carb spacer $50
    Aluminum SBF Brinn Flywheel $250
    Steel SBF Brinn Flywheel $75
    AllStar Power steering pump $50
    19” four blade GM style fan $20
    REBCO wide five camber caster gauge $65
    5.) GENESIS G3 double adj. shocks 4 nights since fresh from Genesis with dual stage kit and springs $2000
    1.) Bilstein ASN LRF shock by speedway 7c 3r $100
    6.) AFCO 13t series shocks Valved by speedway motors slick track set-up with dual stage kit and springs $750
    Wehrs aluminum J-bar 18 Ύ” adjustable both ways $75.......SOLD
    Adjustable aluminum frame mount panhard angled bracket $50.....SOLD
    PPM aluminum bearing birdcages newer bearings also comes with clevis shock mounts, and lock brackets. $350
    PPM 4 links aluminum hex tubes with clearanced LRL bar with the good heims only 8 nights old $40......SOLD
    AFCO style aluminum Clamp on Shock Bracket $25
    HOWE clamp bracket for LR axle chain $10
    MasterSbilt lift arm and support bar $50
    MasterSbilt 6th coil $50
    1” wide five wheel spacer $50
    BRT 3.9 18 ½” with heavier style servo 10 nights since fresh from
    Out-Pace $350
    3.) 8” upper control arms bolt in style ball joints $10 ea.
    2.) 10 ½” upper control arms bolt in style ball joints $10ea......SOLD
    4.) 7 Ύ” upper control arms bolt in style ball joints $10 ea.
    1.) 8 Ό” upper control arms bolt in style ball joint $10
    1.) 8 ½” upper control arm bolt in style ball joint $10......SOLD
    PPM RF and LF MasterSbilt S7 spindles $75 ea.......SOLD
    TWM RF and LF MasterSbilt smackdown spindles $50 ea
    RF MasterSbilt brand smackdown spindle $35
    PPM GEN X RF lower control arm $65.....SOLD
    PPM Smackdown 16 ½” LF lower control arm $65......SOLD
    PPM Smackdown RF lower control arm 18 5/8” $65
    Out-Pace Smackdown RF lower control arm 18 5/8” $50
    Out-Pace Smackdown LF lower control arm 16 ½” $50
    QA1 ball joints screw in style uppers and lowers with 2 extra 1” tall studs two uppers, two lowers and two extra 1 “ taller studs for roll center changes one for upper one for lower 4 nights old. $ 75
    4.) Drilled and Scalloped Rotors 6.13 lbs only 4 nights old $100.......SOLD
    4.) Wilwood superlite hubs and bearings $35 ea.
    2.) Wilwood drive flanges Black and only 4 nights old $40
    4.) MasterSbilt brand Aluminum 1 Ύ” piston Brake Calipers $250
    2.sets) Wilwood poly E pads only 4 nights old $50.......SOLD
    TCI electric RF brake shut off valve only 4 nights old $50
    Wilwood Brake pedal and clutch assembly with 1” masters for front and Rear smaller master for clutch also comes with bias adjuster. $200
    2.) 6” Real beadlocks 12” IMCA style aluminum wheels $135ea.
    2.) 5” beadlocks 12” older Real IMCA style aluminum wheels $120ea.
    1.) 5” Duralite beadlock 12” IMCA style aluminum wheel $135
    3.) 4” Real and Duralite beadlock 12” IMCA aluminum wheels $135
    4.) 4” Real and Duralite NON beadlock wheels $100ea.
    6.) HOOSIER IMCA late model tires only a few races old all 29’s but one $35ea
    Many springs and aluminum swedged tubes also….
    Last edited by 35racing; 09-13-2014 at 10:53 AM. Reason: UPDATED

  2. #2
    Join Date
    May 2008
    Posts
    102

    Default

    List updated...... Chassis, Spindles jbar, rotors, pads, some control arms, all sold...

  3. #3
    Join Date
    May 2008
    Posts
    102

    Default

    ADDITIONAL PARTS FOR SALE

    Winters quickchange rear end out of a MasterSbilt 4.86 with out-pace pinion plate....$800
    2 bbl. K&N flow control air cleaner assembly....$125
    Chrome K&N air cleaner assembly....$50
    AFE air filter 4"....$10
    17" 6 blade fan....$5.00
    15" 6 blade fan....$5.00

    COIL OVER SPRINGS.....$10 each

    14" 12" 10"

    3.) 250 1.) 525 2.) Progressive
    1.) 240 2.) 500 1.) 550
    2.) 225 1.) 475 2.) 525
    4.) 200 1.) 450 2.) 475
    1.) 400 2.) 450
    1.) 375 1.) 400
    1.) 350 1.) 300
    1.) 250
    3.) 225

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 10:25 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.