Results 1 to 3 of 3

Thread: tread width

  1. #1

    Question tread width

    need some suggestions on thread width on a mustang using offset rims do i need to widen the rf and narrow the Lf or widen front and rear front width 59'' rear width 61 1/2'' rules will not allow the longer a arm on rf i can run any offset .i'm stuck on what to buy any help would be nice thanks

  2. #2
    Join Date
    May 2007
    Location
    Illinois
    Posts
    1,690

    Default

    Most guys stick the RF out further than the RR. Or use a 87-88 Tbird RF LCA, direct bolt on & 3/4" longer than mustang.

  3. #3

    Default

    The front tires should be wider than back. right side should be bigger than left. to put it simple..... use offset to make tires stick OUT in front. use offset to make tires set under car in rear. tires on passenger side should be bigger so you can set stagger. set left front tire 1/4 to 1/2 inch out for toe in

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 06:36 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.