Wanting some advice on set up. I have a 1000 in LF a 950 Rf 275 lr 225rr . 55% rear and cross is about 53%. About 190lbs in left rear. Car drives pretty good but struggling get of the corner. Not sure what the affects of more left rear will do. I have been told to much can make it loose off. Any suggestions?
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 6 of 6
Thread: UMP Super stock setup?
-
07-13-2015, 11:25 PM #1
Junior Member
- Join Date
- May 2007
- Location
- indiana
- Posts
- 29
UMP Super stock setup?
-
07-14-2015, 09:26 AM #2
Senior Member
- Join Date
- Sep 2012
- Posts
- 127
More lr should free it up getting in and tighten coming off. What kind of car? Metric?
-
07-15-2015, 06:35 AM #3
Senior Member
- Join Date
- Jun 2007
- Posts
- 570
switch front springs, that will help carry more load on rear tires. May need to make rf 1100 instead of 1000
-
07-15-2015, 01:18 PM #4
Senior Member
- Join Date
- May 2007
- Posts
- 422
I would go with 200 spring on RR and 250 on LR and increase to 225 on bite.
-
07-15-2015, 01:19 PM #5
Senior Member
- Join Date
- May 2007
- Posts
- 422
And increase rear % to 57
-
07-20-2015, 09:24 AM #6
Senior Member
- Join Date
- May 2013
- Posts
- 124
I am not going into all of our setup but, we run a lot of LR bite, 444#, LR spring is a 16" 200 and RR is a 13" 275, LF is 1000 and RF 1100. The car handles great on a dry slick or a tacky track.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 01:33 PM.
Bookmarks