Sell: Open Mod. Engine

[stewie]

380 ci. 4.17 X 3.48. Little M block, 50 mm cam. Dart 227 CNC heads, angle milled .110 to 60cc chambers and 21.5 degrees, SS 2.08/1.6 valves, titanium retainers and Erson valve springs. T&D 1.5/1.5 offset intake Competition Shaft Rockers (pressurized oiling). edelbrock 2925 intake (ported). Bullet roller cam, PBM rebuilable lifters with intakes offset to match heads. 3/8 inch push rods. Diamond pistons, Cola crank, Lunati Pro Mod 6" rods, Cloyes timing chain and cover. Stewart water pump, billet V-belt pulleys, Champ 7" oil pan with CVR aluminum oil pump. Race winner, put it in and go racing. Approximately 12 nights on rebuild/freshen. Located in north central Iowa. Engine in run in stand, hear it run. $7500.00 If not just tire kicking, will give name and number of builder. Builder has chassis dyno info. Dave 641-424-6200.

[stewie]

Still have engine, make offer, will consider good Bert/Brinn/Falcon setup as partial trade.