-
shackle angle ??
converting a 3 link clip car to leaf springs , with nothing but the front and rear suspension on the chassis ,what type of angle should the shackles be , i understand 90 degrees is a good starting point but i think that is at full weight ...just need a good starting point with bare chassis ...thanks .
-
90 Deg to the spring angle at ride height is where it needs to be. If its less than 90 it stiffens the rate and greater than 90 softens the rate. So no one can tell you where it needs to be right now while your building it. I would just tack the rear mount on so it can be moved when your done.
Dave
2012 UMP Stock Car National Champions.
2013 UMP Modified Rookie of the Year
2014 Kankakee Speedway UMP Modified Champion
2016 Fairbury American Legion Speedway UMP Modified Champion
2016 Kankakee Speedway UMP Modified Champion
2016 UMP Modified, Northen IL Regional Champion
2018 UMP Modified, #2 National Points Standings
Like us on Facebook,
https://www.facebook.com/McKinneyMotorsports
-
A slider set up is also an option. It may be more consistent than shackles.
-
Afco has A leaf spring set up tech sheet you can get off their web site that is very useful
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -5. The time now is 01:41 AM.
Bookmarks