Results 1 to 4 of 4

Thread: lr wheel spacer

  1. #1

    Default lr wheel spacer

    what is everyone's thoughts on lr wheel spacer???? took 1 inch wheel spacer from right rear and put on left rear and freed up car on exit

  2. #2
    Join Date
    Feb 2010
    Posts
    247

    Default

    To be short, you have something else going on to make the car free up on exit with that change. You pulled the RR under the car more, and moved the LR out from under the car more. This move will typically tighten the car on throttle (exit). My guess is the car has very little load on the LR in the first place. Might have too much body roll loading the RR. Just something to think about.

  3. #3
    Join Date
    May 2007
    Location
    tulsa america
    Posts
    2,686

    Default

    Sounds like he got the car too tight and now its pushy loose. He just didn't notice the pushy part because its "comfortable"

  4. #4

    Default

    lf motorsports....with the wheel spacer on the right rear i only had 20lbs of bite on scales,so now i am sure that i am on the right rear bite side....so to begin with i did not have much load on the left rear

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 12:33 PM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.